Solution
Provides highly integrated coverage of airborne power simulation, cable-bundle injection, lightning surge, ESD, RF radiated immunity, and power transient testing.
The high-precision programmable power supply HPS-XXXX series is mainly used in electrical performance testing of automotive electronic equipment and electrical load testing of electronic and electrical components, battery charge and discharge and ripple heating testing, capacitor material testing, electroplating processing and other fields. It has a four-quadrant operating mode, can both provide power and absorb power, and can drive inductive loads and capacitive loads. It has the advantages of output accuracy and low drift at high temperatures, with a minimum programmable time of 3μs in steps of 1μs, which can easily achieve fast programming output, and the output bandwidth ranges from DC to 500kHz. It also supports arbitrary waveforms and can be combined with common waveforms for output. The integrated external voltage detection function can be used as a closed-loop Vpp output to meet the ripple superposition test requirements of ISO16750-2-2023. With the corresponding current and boost transformers, it can
The high-speed square wave and high-speed damped oscillator wave generator MIL-CS116S is a product designed and developed for the CS115 and CS116 test requirements in GJB 151A-1997, GJB 152A-1997, GJB 151B-2013 and MIL-STD-461F standards. It can be applied to the power line or signal line at a pulse repetition frequency of 1 Hz to 40 Hz. The test duration is up to more than 60 minutes and meets the linear adjustment of the pulse peak value of 0.01-10 A. Conducted susceptibility testing of interconnection and power cables for all aircraft, space and ground systems. It can output 6 types of damped oscillation waves and high-speed square waves including 10KHz~100MHz through an N-type port without changing the probe. MIL-CS116 has an intelligent control platform and good human-machine control functions. It can complete various tests by simply setting the test requirements on the parameter setting page. It has the advantages of high system integration, intelligent control, easy operation, and saving test time. Acc
The lightning surge generator SUG-562 is a high-end test equipment specially designed to simulate the phenomenon of surge pulse interference. Its performance fully meets the EU CE certification and CCC certification immunity test requirements for single-phase equipment under test. Through the built-in coupling decoupling network, the power port of the equipment under test is surge tested, and the communication line can be surge tested through the external network. According to standards: IEC61000-4-5, EN61000-4-5 and GB/T17626.5, etc.
Static electricity between the human body and an object or between two objects can sometimes produce a voltage of tens of thousands of volts, which may cause circuit malfunction or even damage to electrical and electronic equipment. The electrostatic discharge simulator ESD-20A is an advanced intelligent electrostatic discharge generator with a maximum output voltage of 20kV. It is also an independently developed and produced electrostatic discharge simulator that integrates discharge gun head and touch screen control. The LCD touch screen is simple and easy to operate, and the RC module is replaceable, ensuring reliability in various testing situations. According to standards: ISO 10605, GB/T 19951, GB/T17626.2, IEC61000-4-2, etc.
The RF conducted immunity test system CSR-608 adopts an integrated design with built-in signal synthesizer, power meter, RF power amplifier dual directional coupler (optional), etc. It can output CW, AM, PM and other modulated or unmodulated RF signals from 100kHz to 300MHz. The wide input range power meter can detect power signals from -85DBm to 10DBm without interruption. Selectable average mode or pulse mode to handle detecting amplitude modulated or pulse modulated signals. Each part can work independently, and an external power amplifier can be used. The truly one-piece design makes calibration faster, and all frequency points can be calibrated in tens of seconds. The RF conducted immunity test system CSR-608 is used for conducted immunity testing of civilian products. According to standards: IEC61000-4-6 and GB/T 17626.6, etc.
Power line spike pulse generator MIL-CS106 is a product designed and developed for the CS106 test requirements in GJB 151A-1997, GJB 152A-1997, GJB 151B-2013 and MIL-STD-461F standards. It can be applied to the ungrounded input power line of the EUT at a pulse repetition frequency of 1 Hz to 20 Hz, with a test duration of up to 30 minutes, meeting the linear adjustment of the 0-800 V pulse peak. MIL-CS106 has an intelligent control platform and good human-machine control functions. The built-in coupling transformer makes the operation process convenient and simple. You only need to set simple test requirements on the parameter setting page to complete various tests. It has the advantages of high system integration, intelligent control, easy operation, and saving test time. According to standards: GJB 151A-1997, GJB 152A-1997, GJB 151B-2013 and MIL-STD-461F, etc.
Highly integrated equipment occupies less laboratory space.
Suitable for the construction of secure laboratories at research institutes.
Supports acceptance testing to military standards and civil aviation airborne equipment type-testing requirements.
